Short Product Description
We are a professional permanent magnet manufacturer with over 30 years of experience in rare earth magnet production. Unlike standard axially magnetized rings, this diametrically magnetized ring magnet has its north and south poles positioned on opposite curved sides of the ring circumference, rather than on the flat end faces. This side-pole geometry produces a magnetic field that runs across the diameter of the ring, making it the preferred choice for applications where the sensor or read head approaches the magnet from the side rather than from the face. Available in grades N35 to N48, with standard sizes from 6mm to 50mm outer diameter. Ideal for absolute rotary encoders, angle sensors, Hall-effect position sensing, and compact single-pair brushless DC motors. Custom sizes, pole orientations, and tighter tolerances available upon request.
Technical Specifications
Parameter | Specification
Material | Sintered NdFeB (Neodymium-Iron-Boron)
Grade Range | N35 / N38 / N40 / N42 / N45 / N48
Outer Diameter (OD) | Standard 6mm to 50mm; custom up to 100mm available
Inner Diameter (ID) | Customizable to fit shaft or mounting bore
Thickness | 1mm to 20mm standard; custom available
Tolerance | ±0.1mm standard; ±0.05mm available for precision encoder applications
Magnetization Direction | Diametrical – North and South poles on opposite curved sides
Pole Orientation | North on one side, South 180° opposite
Coating | Ni-Cu-Ni (standard), Zinc, Epoxy, Gold, Passivation
Max Working Temperature | N grade: 80°C; M: 100°C; H: 120°C; SH: 150°C
Remanence (Br) | 1.18–1.42 T (N35–N48)
Surface Gauss (Typical, N42, 20x10x5mm) | Approximately 3500 Gauss
Pull Force (Typical, N42, 20x10x5mm) | Approximately 3.2 kg vertical pull
Density | 7.5 g/cm³
Product Features and Advantages
Side-Pole Geometry for Angular Sensing – The defining characteristic of a diametrically magnetized ring is its pole placement on opposite curved sides, creating a single sinusoidal magnetic field cycle per revolution. This makes it ideal for absolute rotary encoders, where a sensor positioned adjacent to the ring's curved surface reads a smooth, predictable angular signal.
Field Perpendicular to Axis – Unlike axially magnetized rings where flux runs along the central axis, diametrical magnetization produces a field that is perpendicular to the axis, passing across the diameter. This orientation is essential when the sensor must approach from the side (radially) rather than from the end face.
Compact One-Piece Construction – A single diametrically magnetized ring replaces two separate arc magnets or a complex assembly. This monolithic design simplifies mounting, eliminates segment alignment errors, and ensures consistent pole positioning.
Excellent Demagnetization Resistance – Sintered NdFeB material with proper coating offers high intrinsic coercivity, ensuring stable performance in dynamic applications with varying temperature and external fields.
Precision Machined for Concentricity – Advanced inner and outer diameter grinding ensures concentricity between the bore and the outer surface, critical for encoder applications where even minor eccentricity introduces angular error.
Not the Same as Radially Magnetized – This is a critical distinction. A radially magnetized ring has poles on its inner and outer cylindrical surfaces (flux flows ID-to-OD). A diametrically magnetized ring has poles on opposite sides of the circumference (flux flows across the diameter). Confusing these two patterns is the most common specification error in the industry. If your sensor approaches the ring from the side and needs a single pole-pair per revolution, diametrical magnetization is the correct choice.
Application Scenarios
Absolute Rotary Encoders – Diametrically magnetized rings produce a single sinusoidal magnetic field cycle per revolution, enabling absolute angular position measurement over 360°. Commonly paired with off-axis magnetic encoders or Hall-effect sensors in robotics, motor feedback, and automation systems.
Angle and Position Sensors – Hall-effect angular position sensors rely on a predictable radial field to determine shaft angle. The side-pole orientation provides a stable signal source when the sensor is positioned adjacent to the ring's curved face.
Compact Brushless DC Motors (Single-Pair) – Small BLDC fan motors and single-pair motor designs use diametrically magnetized rings for their rotor, where the field across the diameter interacts with the stator windings to produce rotation.
Robotic Joints and Servo Feedback – Precision robotics and servo systems require accurate shaft position feedback. Diametrically magnetized rings mounted on the shaft, with the encoder IC positioned radially, provide reliable absolute position data in compact form factors.
Medical and Laboratory Equipment – Rotary valves, syringe pumps, and precision instruments use diametrically magnetized rings for non-contact position detection where space is constrained and reliability is critical.
Educational and Prototyping Kits – Widely used in STEM education and prototyping for demonstrating magnetic field orientation and building simple rotary sensing circuits.
Quality Assurance and Certifications
Certifications include IATF 16949 (automotive quality management), ISO 9001, ISO 14001 (environmental), and ISO 45001 (occupational health). Compliance with RoHS, REACH, and CP65. 100% inspection on dimensions, magnetic properties (Br, Hc, BHmax), and coating adhesion. For encoder-grade rings, we offer pole position verification to ensure North-South alignment is within specification. Full traceability from raw material to finished product. Packaging uses anti-magnetic shielding, foam protection, and export-grade cartons.
Customization Services
We offer full customization on Grade – N35 to N48, with temperature grades M/H/SH available. Size – OD from 4mm to 100mm, ID to fit your specific shaft diameter, thickness from 0.5mm to 30mm. Pole Orientation – Standard North-South across the diameter; custom angular offset available. Coating – Ni-Cu-Ni, Zinc, Epoxy, Gold, or Passivation. Tolerance – ±0.1mm standard; ±0.05mm or better available for encoder-grade applications. Additional features – Chamfers, countersinks, and through-holes for mechanical mounting.
Critical Design Note: Diametrical magnetization requires a dedicated magnetizing fixture that is significantly more complex than axial magnetization tooling. The fixture cost is typically 3–5× higher than axial and must be factored into custom orders. However, once tooled, the fixture is reusable for all rings of the same dimensions and pole orientation.
Sample Policy: Custom samples available within 10–15 working days. Free samples for qualified encoder and motor projects.
Why Choose Us
We have over 30 years of experience in rare earth magnet production – one of China's earliest NdFeB manufacturers. Our vertical integration gives us full control from raw material to finished product. We understand the critical difference between diametrical and radial magnetization – a distinction that many suppliers overlook. Our engineering team provides free design assistance to ensure you specify the correct magnetization pattern for your sensor or motor application. Long-term supplier to Fortune 500 companies including General Motors, Ford, Samsung, and Xiaomi. 24-hour quote and technical support.
Frequently Asked Questions
What is the difference between diametrically magnetized and radially magnetized rings? Diametrically magnetized rings have poles on opposite sides of the circumference (one half North, one half South). Radially magnetized rings have poles on inner and outer cylindrical surfaces (ID-to-OD flux). They produce fundamentally different field distributions and serve different applications.
When should I choose diametrical magnetization? Choose diametrical magnetization when your sensor approaches the ring from the side (radially, adjacent to the curved surface) and you need a single pole-pair per revolution for absolute position sensing. Typical applications include rotary encoders and angle sensors.
Can I use this ring for a motor rotor? Yes, for single-pair BLDC motors and small fan motors. For multi-pole motor rotors, radially magnetized rings are typically the better choice because the field must cross the air gap from ID to OD.
What is the maximum working temperature? Standard N grade: 80°C. M grade: 100°C. H grade: 120°C. SH grade: 150°C.
What tolerance do you recommend for encoder applications? For encoder-grade rings, we recommend ±0.05mm or better on concentricity and pole alignment. Standard ±0.1mm is suitable for general sensor applications.
Do you offer pole position verification? Yes. For encoder-grade rings, we can provide pole position measurement reports confirming North-South alignment within specification.
What is the delivery time? Standard sizes: 10–15 working days. Custom sizes with new tooling: 20–30 working days.
What is the minimum order quantity? MOQ varies by size and grade; contact us for details.
Contact Us
Get a Quote Today! Email: zb16@magnets-world.com. Phone/WhatsApp: +86 18119636123. Address: Room 201, No.15, Longxinli, Siming District, Xiamen, Fujian, China. We reply within 24 hours.
Hot Tags: diametrically magnetized ring, China diametrically magnetized ring manufacturers, suppliers, factory, n42 neodymium magnet, neodymium magnet custom size, ring magnet magnetic clutch, ring magnet mechanical assembly, ring magnet torque coupling system, ring magnet vibration resistant magnet component





